NEW, INNOVATIVE AND PATENTED - TWO FITTINGS in ONE
MBSP55 - Combines the Ezi-action® MBSP and M55 Adaptor Fittings
The Ezi-action® MBSP55 can be used to secure the Ezi-action® Drumpump into either a metal drum with British Standard fine thread (58mm outside diameter of bung) opening or into a plastic drum with 56 x 4 buttress opening.
The 200 litre drums manufactured in New Zealand by Alto have both these thread openings so the Ezi-action® MBSP55 Adaptor Fitting will fit both sides of an Alto drum.
The Ezi-action® MBSP55, like all Ezi-action® M Fittings, is a three-part construction with locking nut, which can easily be loosened by hand and the locking ring which grips the Ezi-action® Drumpump shaft when hand tightened, assures security and leak free operation.
The Ezi-action® Drumpumps are the hand pump of choice around the world when dispensing from bulk containers and the addition of the Ezi-action® MBSP55 Adaptor Fitting is a welcome solution to the problem of different thread openings on drums.
The combination of two threads on one fitting simplifies the transfer of the Ezi-action® Drumpump between different drums.
The Ezi-action® M Fittings required in New Zealand and Australia are MBSP55, M63 and M69. The thread requirement can vary with the country of origin of the drum.